Carlisle

Career Opportunities

If you are interested in any of the posted employment opportunities at Carlisle FoodService Products, please click on the icon links below to download an applications. On your applications, you must specify what position you are applying for and dont forget to include the preferred shift or location (if applicable), a cover letter, resume, references and salary requirements.

  • AS400 Programmer
    Location:
    Hefner-OKC
    Dept:
    MIS
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    316
    Openings:
    1
  • Assembler I
    Location:
    Santa Fe-OKC
    Dept:
    Rotational Molding
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    326
    Openings:
    3
    Description:

    The Rotational Molding Assembler must be mechanically inclined and have good manual dexterity. Requires a high degree of mental and visual attention. Must be able to operate a variety of equipment. Must be able to inspect, trim, repair, clean and pack out all products produced in Rotational Molding. Must be capable of producing quality parts from trimming till the final pack out at standard and be able to comprehend and communicate instructions.

  • Assembler I
    Location:
    Santa Fe-OKC
    Dept:
    Rotational Molding
    Job Type:
    Full Time
    Shift:
    2nd
    Job Id:
    327
    Openings:
    1
    Description:

    The Rotational Molding Assembler must be mechanically inclined and have good manual dexterity. Requires a high degree of mental and visual attention. Must be able to operate a variety of equipment. Must be able to inspect, trim, repair, clean and pack out all products produced in Rotational Molding. Must be capable of producing quality parts from trimming till the final pack out at standard and be able to comprehend and communicate instructions.

  • Assembler I
    Location:
    Santa Fe-OKC
    Dept:
    Rotational Molding
    Job Type:
    Full Time
    Shift:
    3rd
    Job Id:
    328
    Openings:
    1
    Description:

    The Rotational Molding Assembler must be mechanically inclined and have good manual dexterity. Requires a high degree of mental and visual attention. Must be able to operate a variety of equipment. Must be able to inspect, trim, repair, clean and pack out all products produced in Rotational Molding. Must be capable of producing quality parts from trimming till the final pack out at standard and be able to comprehend and communicate instructions.

  • Carlisle Operating Systems Lead
    Location:
    Tukwila, WA
    Dept:
    Carlisle Interconnect Technologies
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    365
    Openings:
    1
  • Carlisle Operating Systems Manager
    Location:
    Long Beach, CA
    Dept:
    Carlisle Interconnect Technologies
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    364
    Openings:
    1
  • COS Business Process Improvement Manager
    Location:
    Oklahoma City, OK
    Dept:
    Carlisle Operating Systems
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    363
    Openings:
    1
  • Customer Service Rep
    Location:
    Hefner-OKC
    Dept:
    Customer Service
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    302
    Openings:
    4
    Description:

    The Customer Service Representative is responsible for inbound calls and/or order entry, solving problems for customers or sales reps and for maintaining accounts. Must have ability to multitask. Will report problems and issues immediately to Supervisor or Management for assistance. Will comply with all company policies and procedures. This position may entail answering phone or keying orders or a combination of both. The position must have at least one-year experience in a customer service environment.

  • Director of Sales
    Location:
    Field Sales
    Dept:
    Sales
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    331
    Openings:
    1
  • Injection Tech I
    Location:
    Lincoln-OKC
    Dept:
    Injeciton Molding
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    335
    Openings:
    1
    Description:
    The Process Technician I is responsible for learning how to produce maximum production of parts, with proper cavitations that conforms to quality assurance specifications. Perform basic adjustments on injection molding presses with guidance and instructions.
  • Injection Tech I
    Location:
    Lincoln-OKC
    Dept:
    Injeciton Molding
    Job Type:
    Full Time
    Shift:
    3rd
    Job Id:
    337
    Openings:
    1
    Description:
    The Process Technician I is responsible for learning how to produce maximum production of parts, with proper cavitations that conforms to quality assurance specifications. Perform basic adjustments on injection molding presses with guidance and instructions.
  • Injection Tech II
    Location:
    Lincoln-OKC
    Dept:
    Injection
    Job Type:
    Full Time
    Shift:
    3rd
    Job Id:
    341
    Openings:
    1
    Description:
    The Process Technician II is responsible for producing maximum production of parts, with proper cavitations that conforms to quality assurance specifications. Assures that all work performed on own shift is at/or above injection molding standard parameters as applicable. Responsible for hanging and pulling molds. Responsible for setting up machines and all auxiliary equipment.
  • International Account Specialist
    Location:
    Hefner-OKC
    Dept:
    International Customer Service
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    358
    Openings:
    1
    Description:

    As an International Account Specialist, this position must have a basic understanding of global geography and possess a cultural inquisitiveness.   This position is responsible for all aspects of customer care giving the highest level of service at all times, to all individuals.  Is knowledgeable and experienced in all facets of the procedures and policies of the company and strives to deliver exceptional service. 

  • Machine Operator
    Location:
    Batavia, IL
    Dept:
    Extrusion
    Job Type:
    Full Time
    Shift:
    3rd
    Job Id:
    352
    Openings:
    1
    Description:
    This position is responsible for the set up and operation of the extrusion machine to produce high quality product. Monitors and records machine temperature, gauge settings and die openings. Monitors the color, dimensions, and uniformity of the material and makes necessary adjustments to meet customer requirements. Change jets, tees, and wipe packs as necessary. Inspects finished product to ensure production quality. Performs light maintenance on machine when needed.
  • Machine Operator
    Location:
    Batavia, IL
    Dept:
    Thermoforming
    Job Type:
    Full Time
    Shift:
    2nd
    Job Id:
    347
    Openings:
    1
    Description:
    The thermoforming operator tends the thermoforming machines to produce high quality products by monitoring, recording, and making adjustments to the machine as needed to meet customer requirements. Must be willing to work overtime at a short notice and/or any shift when needed.
  • Machine Operator
    Location:
    Batavia, IL
    Dept:
    Thermoforming
    Job Type:
    Full Time
    Shift:
    3rd
    Job Id:
    351
    Openings:
    1
    Description:
    This position is responsible for the set up and operation of the extrusion machine to produce high quality product. Monitors and records machine temperature, gauge settings and die openings. Monitors the color, dimensions, and uniformity of the material and makes necessary adjustments to meet customer requirements. Change jets, tees, and wipe packs as necessary. Inspects finished product to ensure production quality. Performs light maintenance on machine when needed.
  • Machine Operator
    Location:
    CSMP-Sparta
    Dept:
    Cylinder/Pastry
    Job Type:
    Full Time
    Shift:
    2nd
    Job Id:
    324
    Openings:
    2
    Description:
    The Machine Operator position manufactures subassemblies for pastry handles by operating a head-filler machine. This position must be capable of using a weigh count scale. The use of small hand tools such as utility knife, scissors, wrench, pliers, and hammer are required for this position.
  • Machine Operator
    Location:
    CSMP-WI
    Dept:
    Staple Set
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    345
    Openings:
    2
    Description:

    The Machine Operator position operates the staple-set machine to make brushes. Responsible for starting and operating machines that make brushes, stamp brushes, and trim brushes.

  • Maintenance Mechanic
    Location:
    CSMP-Sparta
    Dept:
    Maintenance
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    330
    Openings:
    1
  • Maintenance Supervisor
    Location:
    Proex-Batavia, IL
    Dept:
    Maintenance
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    258
    Openings:
    1
    Description:

    Directs skilled and unskilled maintenance staff in the maintenance of building, grounds tooling and equipment. Supervises and trains employees. Receives work priorities from higher level managers and delegates assignments to ensure timely and efficient completion of projects. Recommends or initiates personnel actions and insures compliance of company policies for the department. The person in this position must possess demonstrated knowledge of thin-guage extrusion and thermoforming with special emphasis working with a variety of resins, particularly with polypropylene (both mono and co-polymer and talc filled).

  • Maintenance Tech I
    Location:
    Lincoln-OKC
    Dept:
    Maintenance
    Job Type:
    Full Time
    Shift:
    3rd
    Job Id:
    321
    Openings:
    1
    Description:
    The Maintenance Mechanic I is responsible for troubleshooting, repairing and maintaining all equipment and facilities at the skill level outlined in the Maintenance Skills Based Matrix. This includes building fixtures, jigs, general plant maintenance, basic to mid-level hydraulic, electrical repair and welding and general plant maintenance. This position may be reassigned to any shift based on production and maintenance needs. This position requires basic computer, Excel, and Word skills, or equivalent.
  • Maintenance Technician IV
    Location:
    Lincoln-OKC
    Dept:
    Maintenance
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    368
    Openings:
    1
  • Materail Handler
    Location:
    Batavia, IL
    Dept:
    Extrusion
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    353
    Openings:
    1
    Description:
    This position assembles, tapes, places, wraps and/or bands cartons to pallets.
  • Material Handler
    Location:
    Batavia, IL
    Dept:
    Extrusion
    Job Type:
    Full Time
    Shift:
    3rd
    Job Id:
    349
    Openings:
    1
  • Operator I
    Location:
    Lincoln-OKC
    Dept:
    Injection
    Job Type:
    Full Time
    Shift:
    2nd
    Job Id:
    356
    Openings:
    3
    Description:

     The Operator I is responsible for ensuring that all products are inspected and packaged according to production and quality assurance standards, and must be capable of using equipment associated with production.

  • Operator II
    Location:
    Lincoln-OKC
    Dept:
    Injeciton Molding
    Job Type:
    Full Time
    Shift:
    2nd
    Job Id:
    329
    Openings:
    1
    Description:
    The Operator II is responsible for monitoring and coordinating personnel in their work sections and ensuring that all products are inspected and packaged according to production and quality assurance standards, and must be capable of using all equipment associated with production. The Operator II is also responsible for giving and monitoring breaks for Operator I.
  • Operator II
    Location:
    Lincoln-OKC
    Dept:
    Injection
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    360
    Openings:
    1
  • Operator II
    Location:
    Lincoln-OKC
    Dept:
    Injection
    Job Type:
    Full Time
    Shift:
    3rd
    Job Id:
    354
    Openings:
    1
    Description:
    The Operator II is responsible for monitoring and coordinating personnel in their work sections and ensuring that all products are inspected and packaged according to production and quality assurance standards, and must be capable of using all equipment associated with production. The Operator II is also responsible for giving and monitoring breaks for Operator I.
  • Pricing Administrator
    Location:
    Hefner-OKC
    Dept:
    Sales Services
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    339
    Openings:
    1
    Description:
    The Pricing Administrator reports to the Sales Projects Manager and works closely with the Director of Sales Services and Customer Service personnel, Director's of Sales, Sales Representatives, Cost Accountant, and the Sales Administrator. The position is responsible for carrying out the pricing functions on a timely and accurate basis.
  • Production Supervisor
    Location:
    Sparta, WI
    Dept:
    Production
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    366
    Openings:
    1
  • Quality Technician
    Location:
    Sparta, WI
    Dept:
    Quality
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    367
    Openings:
    1
  • Sales Admin. Clerk
    Location:
    Hefner-OKC
    Dept:
    Sales Services
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    284
    Openings:
    1
    Description:

    This position is responsible for various administrative duties associated with agreements between Carlisle and our customers. This position is required to work closely with and assist the Sales Administrators, Directors of Sales, VP of Sales, and VP of Sales Services.

  • Set-Up Mechanic
    Location:
    CSMP-Sparta
    Dept:
    Maintenance
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    332
    Openings:
    1
  • Set-Up Mechanic
    Location:
    CSMP-Sparta
    Dept:
    Maintenance
    Job Type:
    Full Time
    Shift:
    2nd
    Job Id:
    333
    Openings:
    2
  • Sourcing Manager
    Location:
    Batavia, IL
    Dept:
    Sourcing
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    361
    Openings:
    1
  • Sr. Sourcing Specialist
    Location:
    Batavia, IL
    Dept:
    Sourcing
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    362
    Openings:
    1
  • Utility
    Location:
    Lincoln-OKC
    Dept:
    Injection
    Job Type:
    Full Time
    Shift:
    2nd
    Job Id:
    340
    Openings:
    1
    Description:
    Responsible for maintaining adequate plastic resins and colors at all injection molding presses in assigned area during production runs. Responsible for ensuring dehumidifying dryers are set at correct drying temperatures and working properly at all times if drying is required.
  • Warehouse Worker
    Location:
    Batavia, IL
    Dept:
    Batavia DC
    Job Type:
    Full Time
    Shift:
    1st
    Job Id:
    359
    Openings:
    1

Application Download Links

Please use the Application Link to download an application form. You can mail your application to the address below or (drop it off using a drop box in Oklahoma City at the Lincoln and 36th St. locations). Please check with your local library or state Workforce centerif you need to print a hard copy of the application.

    Corporate Office

  • Carlisle FoodService Products, 4711 East Hefner Rd. Oklahoma City, OK 73131
  • Dinex, 628 Hebron Ave. Building 2 Suite 106, Glastonbury, CT 06033

  • Production Facilities

  • Carlisle FoodService Products, 12 NE 36th St. Oklahoma City, OK 73105 (Drop-Off)
  • Carlisle FoodService Products, 3421 NE Lincoln Blvd. Oklahoma City, OK 73105 (Drop-Off)
  • Carlisle Sanitary and Maintenance Products, 402 Black River St. Sparta, WI 54656

  • Distribution Centers

  • Carlisle FoodService Products, 6720-A North Park Blvd. Charlotte, NC 28216
  • Carlisle FoodService Products, 4711 East Hefner Rd. Oklahoma City, OK 73131
  • Carlisle FoodService Products, 10875 Leer Blvd. Reno, NV 89506
  • Proex, 1011 Olympic Dr. Batavia, IL 60510



If you have any additional questions or concerns email us at careers@carlislefsp.com